Installation Instructions for SCR Low-Frequency Rubber Vibration Isolators
Before installation, please confirm that the model and specifications of the Songjiang Group’s rubber Vibration Isolators are correct.
Installation Guide:
Required Tools: M10, M12, M16, M18, M20 open-end wrenches.
Check if all accessories are complete, and whether the rubber Vibration Isolators have any defects or damage. (See Figure 1)
Place the rubber Vibration Isolators in the installation position of the equipment. (See Figure 2)
Tighten the nuts and washers to ensure that the equipment and rubber Vibration Isolators are securely fixed in place. (See Figure 3)
Structure Diagram and Parameter Table of SCR Low-Frequency Rubber Vibration Isolators:
Related Link:SCR Type Low-Frequency Rubber Vibration Isolator (Suitable for Water Pumps with a Rotational Speed of 600 RPM)
