Installation Instructions for STR Rubber Vibration Isolators
Before installation, please ensure that the model and specifications of the Songjiang Group rubber Vibration Isolators are correct.
Installation Guide
Required Tools: Metric size 17mm (M10), 19mm (M12), 24mm (M16) open-end wrenches.
Check if all accessories are complete and if the rubber shock absorbers have any defects or damage. (See Figure 1)
Place the rubber shock absorber in the installation position of the equipment. (See Figure 2)
Tighten the nuts and washers to ensure that the equipment and rubber Vibration Isolators are securely fixed in place. (See Figure 3)
Structure Diagram of STR Rubber Vibration Isolator:
STR type rubber vibration isolators parameter table:
| Model | L (mm) |
W (mm) |
H (mm) |
CS (mm) |
A (mm) |
B （mm） |
Load（kg） | |
| Min | Max | |||||||
| STR-100 | 95 | 53 | 48 | M10 | 77 | 10 | 50 | 150 |
| STR-130 | 127 | 77 | 70 | M12 | 101 | 14 | 150 | 450 |
| STR-180 | 180 | 118 | 70 | M16 | 149 | 14 | 450 | 1000 |
Fig 1）Check if the accessories are complete and if the rubber vibration isolators has any defects or damage.
Fig 2）Place the isolator on the correct installation position.
Fig 3）Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.
Related Link:STR Type Embroidery Machine Rubber Vibration Isolators
![[Shenjiao Group Co., Ltd.] Rubber Expansion Joint Contract](https://www.sungkiangflex.com/wp-content/themes/sj-1/timthumb.php?src=https://www.sungkiangflex.com/wp-content/uploads/2024/05/Shenjiao-Group-Co.-Ltd.-Rubber-Expansion-Joint-Contract-1.jpg&h=300&w=400&zc=1)
